Welcome Guest [Log In] [Register]
Welcome to www.dirtbikesaction.com Forum!

You're currently viewing our forum as a guest. This means you are limited to certain areas of the board and there are some features you can't use. If you join our community, you'll be able to access member-only sections, and use many member-only features such as customizing your profile, sending personal messages, and voting in polls. Registration is simple, fast, and FOC.

Join our community!

If you're already a member please log in to your account to access all of our features:

Username:   Password:
Add Reply
Bike Set Up; Dialing in your ride is as important as winning the race
Topic Started: 20 Oct 2010, 23:35 (1,392 Views)
airtime
Member Avatar

The pros have some secrets of their own when it comes to gear tweaks and personal preferences. In Setup, they reveal it all. For this installment, we hear from mechanic Patrick Barker on all the specifics of Muscle Milk/Toyota/JGRMX Team rider Justin Brayton's bike.

http://www.allisports.com/alli/moto/video/setup-justin-brayton#ooid=dwNWFyMTr5hhBqp4pQHAyWDjfZXZUnRZ


Posted Image
Offline Profile Quote Post Goto Top
 
rookie
Member Avatar

what i can say is, airtime bike setup is more gungho than the factory bike!
Posted Image


Posted Image
Offline Profile Quote Post Goto Top
 
airtime
Member Avatar

rookie
21 Oct 2010, 10:07
what i can say is, airtime bike setup is more gungho than the factory bike!
hey,don't any how say!!!

its juz lots of T.L.C dat is wat my bike gets. no fancy sticker out look or bling equipment. juz as stock as possible.
Edited by airtime, 21 Oct 2010, 22:04.


Posted Image
Offline Profile Quote Post Goto Top
 
airtime
Member Avatar

its being quite sometime since this thread was active.
well,the most important thing with bike set up begins in the garage,home or dealer's shop.
the factories expect you as the racer/rider to strip and grease your bike.
if you were to ride a brand new mx bike out on the track with dry bearings the wear would increase and life span shorten.

i will try to put up some pics as i set up the 2012 KTM 150sx.

cheers


Posted Image
Offline Profile Quote Post Goto Top
 
rookie
Member Avatar

airtime
1 Sep 2011, 01:46
its being quite sometime since this thread was active.
well,the most important thing with bike set up begins in the garage,home or dealer's shop.
the factories expect you as the racer/rider to strip and grease your bike.
if you were to ride a brand new mx bike out on the track with dry bearings the wear would increase and life span shorten.

i will try to put up some pics as i set up the 2012 KTM 150sx.

cheers
time to show off ur expertise!!!

mine is old bike, no need to grease!!!!! lol lol


anyway, the past 2mth of no riding, is the time i spent to setup the bike.

Bonk

Posted Image


Posted Image
Offline Profile Quote Post Goto Top
 
airtime
Member Avatar

is there anything u wanna share here,rookie?

any tips or problems 2 avoid? prof


Posted Image
Offline Profile Quote Post Goto Top
 
airtime
Member Avatar

anyway,works start dis sat on stripping the bike down n prepping.

with the new torque nuts found on the newer KTMs. i needed 2 get a smaller drill bit for drilling the bolts 2 wire lock.

there 2 fellow riders dat will be dropping 2 see n get some hands on on setting their bikes here dis coming sat.

try 2 get some pics up here on the day's work.

cheers


Posted Image
Offline Profile Quote Post Goto Top
 
rookie
Member Avatar

airtime
2 Sep 2011, 01:03
anyway,works start dis sat on stripping the bike down n prepping.

with the new torque nuts found on the newer KTMs. i needed 2 get a smaller drill bit for drilling the bolts 2 wire lock.

there 2 fellow riders dat will be dropping 2 see n get some hands on on setting their bikes here dis coming sat.

try 2 get some pics up here on the day's work.

cheers
wah so gd.

i never got such gd treatment from u last time, only got abused...

foul

i just need the wire twister and the setup work is consider done deal.

snore
Posted Image


Posted Image
Offline Profile Quote Post Goto Top
 
airtime
Member Avatar

hey rookie....don any how say...ok!!! Bonk Bonk Bonk

if u need 2 use the wire twister thingy.u can always drop by my place prof

will post some pics on the tech thingy in a short while thumbup


Posted Image
Offline Profile Quote Post Goto Top
 
rookie
Member Avatar

dun forget about this

clean carb = clean atomisation


Posted Image
Edited by rookie, 4 Sep 2011, 20:10.
Posted Image


Posted Image
Offline Profile Quote Post Goto Top
 
airtime
Member Avatar

good tip,rookie...no wonder yr bikes was so fast 2day. prof

below is of harold,prepping his bike 4 the 1st off road ride

Posted Image

Posted Image

Posted Image







Posted Image
Offline Profile Quote Post Goto Top
 
airtime
Member Avatar

after all the hard work,harold is super stoked with his new ride!


Posted Image

thumbup


Posted Image
Offline Profile Quote Post Goto Top
 
bsriphet
Member Avatar

Whoa nice, someone got welder, car jack etc in their back yard!! Nice to see Harold working his bike.. thumbup
Offline Profile Quote Post Goto Top
 
airtime
Member Avatar

wow,eagle eyes u have,bsriphet.

yup,rookie is well equip with all the stuff 2 do "magic" on the bike!

i heard dat 2day will be part 2 of harold's bike set up. juz waiting for his trainer - rookie 2 fix the time up.

ridebike


Posted Image
Offline Profile Quote Post Goto Top
 
bsriphet
Member Avatar

airtime
5 Sep 2011, 14:38
wow,eagle eyes u have,bsriphet.

yup,rookie is well equip with all the stuff 2 do "magic" on the bike!

i heard dat 2day will be part 2 of harold's bike set up. juz waiting for his trainer - rookie 2 fix the time up.

ridebike
Very cool, got trainer!! Can sense podium coming up soon!!!
Offline Profile Quote Post Goto Top
 
rookie
Member Avatar

airtime
5 Sep 2011, 14:38
wow,eagle eyes u have,bsriphet.

yup,rookie is well equip with all the stuff 2 do "magic" on the bike!

i heard dat 2day will be part 2 of harold's bike set up. juz waiting for his trainer - rookie 2 fix the time up.

ridebike
mad thumbdown foul confused Bonk rolleyes
Posted Image


Posted Image
Offline Profile Quote Post Goto Top
 
bsriphet
Member Avatar

Rookie have menopause? so much anger... lolss
Offline Profile Quote Post Goto Top
 
airtime
Member Avatar

bsriphet
6 Sep 2011, 00:12
Rookie have menopause? so much anger... lolss
team angry bird manager wat! muz live up 2 the team name! lol lol lol
(dat's it...looks like rookie is going 2 ban me from going 2 his house n using his pool!)

part 2 pics coming here soon.


Posted Image
Offline Profile Quote Post Goto Top
 
airtime
Member Avatar

Posted Image

Posted Image

engine tricks? rolleyes rolleyes
Edited by airtime, 6 Sep 2011, 00:43.


Posted Image
Offline Profile Quote Post Goto Top
 
haroldlouiz
Member Avatar

edward shifu was wondering why u nv take pictures of the bike? hahaha.... why always me in action? whahah is it because this is dike bikes action? =) see ya in awhile!
Offline Profile Quote Post Goto Top
 
1 user reading this topic (1 Guest and 0 Anonymous)
Go to Next Page
« Previous Topic · Technical Articles and Tips · Next Topic »
Add Reply